165MEMORY CHANNELS45anedN,Upryncyy Memory channel programmingq Push [V/M•S.MW•~] to select VFO mode.w Set the desired frequency:➥ Select the desired band with [BAND• ].➥ Set the desired frequency with [DIAL].➥ Set other data (e.g. offset frequency, duplex direction, tonesquelch, etc.) , if desired.ePush [V/M•S.MW•~] for 1 sec. to select select memorywrite condition.• 1 short and 1 long beep sound.• “ ” indicator memory channel number blink.r Rotate [DIAL] to select the desired channel.• Scan edge channel, 00A/B to 24A/B can also be selected.• While pushing [FUNC], rotate [DIAL] to selects memory channelin 10 channels steps.t Push [V/M•S.MW•~] for 1 sec.• 3 beeps sound• Memory channel number automatically increases when contin-uing to push [V/M•S.MW•~] after programming.annel 20 (blank channel).FM DUP SQLSKIPTPFM DUP SQLSKIPTPPush for 1 sec.
