306SCAN OPERATION6kipedsekipry.ectrWhile pushing [FUNC], rotate [DIAL] to select the skip con-dition from “SKIP,” “PSKIP” or “OFF” for the selected chan-nel.• SKIP : The channel is skipped during memory or bank scan.• PSKIP : The channel is skipped during memory/bank scan andthe programmed frequency is skipped during VFO scan,such as programmed scan.• OFF : The channel or programmed frequency is scanned dur-ing any scan.tPush [MODE•SCAN] several times, or while pushing andholding [MODE•SCAN] rotate [DIAL] to select “S.MW” item.yPush [V/M•S.MW•~] for 1 sec. to set the skip condition.• “SKIP” or “P SKIP” indicator appears, according to the skip se-lection in the step r.✔ CONVENIENT!The skip setting can also be set with the following operationfor easy setting.qSelect the desired memory channel to be set as a skipchannel/frequency.wWhile pushing [FUNC], push [V/M•S.MW•~] to select theskip condition from “SKIP,” “P SKIP” and “OFF (no indication).”FMSKIPPFMSKIP• Skip channel setting • Program skip setting“SKIP” appears“P SKIP” appearsing
