6212MAINTENANCE1112If your receiver seems to be malfunctioning, please check thefollowing points before sending it to a service center.squelch.beep tone levelcorrectly.cted in the AMammed.hannel is pro-• Replace the batteries or charge the batteries.• Check the battery polarity.• Push [Y] to obtain a suitable level.• While pushing [SQL], rotate [DIAL] to set thesquelch level.• Turn the appropriate function OFF.• While pushing [FUNC], push [SQL] to urn the at-tenuator function OFF.• While pushing [FUNC], push [BAND• ] for1 sec. to turn the function OFF.• Turn beep tone ON or set the beep tone level to ap-propriate level in set mode.• Push [MODE•SCAN] several times to select a suit-able operating mode.• Turn “EXPAND” item ON.• Choose the AM or FM broadcast band.• Program a pair of scan edge channels.• Program at least 2 memory or bank channels• Re-install the batteries (wait at least for 1 sec.),then plug the AC adapter while pushing [FUNC].pgs. 5, 6p. 5p. 11p. 12p. 35p. 13p. 10p. 41p. 12p. 39p. 7p. 27pgs. 16,17p. 6
