Icom IC-V80 Instruction Manual

Also see for IC-V80: Instruction manual Quick guide Service manual addendum Step-by-Step Programming Guide

Previous view29■ Priority watchA priority watch checks for signals on “priority channel/s”while operating on a VFO frequency.D Memory or Call channel watchWhile operating on a VFO frequency, Priority Watchchecks for a signal on the selected memory or Callchannel (priority channel) every 5 seconds.q Select the VFO mode, and then set the operating fre-quency.w Push [VFO/MR/CALL] several times to select thememory mode or Call channel mode.• For memory channel watch:Push [Y] or [Z] to select the desired memory chan-nel.e Push [FUNC](M), and then push [PRIO](7) to start thewatch.• The decimal point “.”, on the frequency readout blinks.• When a signal is received on the priority channel, thewatch resumes according to the selected scan resumeoption (p. 28).r To cancel the watch, push any key except [ ], [Y]/[Z], [MONI], [FUNC](M), or [PTT].D Memory scan watchWhile operating on a VFO frequency, Priority Watch se-quentially checks for signals on each memory (exceptSkip) channel (priority channel).q Select the VFO mode, and then set the operating fre-quency.w Push [VFO/MR/CALL] several times to select thememory mode.e Push [FUNC](M), and then push [SCAN](5) to startthe memory scan.r Push [FUNC](M), and then push [PRIO](7) to startthe watch.• The VFO mode is automatically selected, and the decimalpoint “.”, on the frequency readout blinks.• When a signal is received on a channel, the watch resumesaccording to the selected scan resume option (p. 28).t To cancel the watch, push any key except [ ], [Y]/[Z], [MONI], [FUNC](M), or [PTT].(The watch starts.)(VFO mode)(Memory mode)The watch checks for a signal on memory channel 10, every 5 seconds.Push , and then push .[i.e.]: The memory channel watch on memory channnel 10.Set the operating frequency.Push to select the memory mode.Push or to select the desired memory channel.(priority channel)VFO frequencyMemory scanMch 0Mch 1Mch 2Mch 199SKIP(The memory scan starts.)(VFO mode)(Memory mode)The watch checks for a signal on each memory channel, every 5 seconds.Push , and then push .[i.e.]: The memory scan watch.Push , and then push .Push , to select the memory mode.Set the operating frequency.7 SCAN OPERATION