Icom IC-V80 Instruction Manual

Also see for IC-V80: Instruction manual Quick guide Service manual addendum Step-by-Step Programming Guide

52Previous view■ IC-U80/IC-U80ED General• Frequency coverage : 400.000–470.000 MHz• Mode : FM, FM-N• Number of memory channels : 207 (including 6 scan edges and 1 Call channel)• Usable temperature range : –20°C to +60°C; –4°F to +140°F• Tuning steps : 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz• Frequency stability : ±2.5 ppm (–20°C to +60°C; –4°F to +140°F)• Power supply : Icom specifi ed battery pack or case• Current drain (at 7.2 V DC: typical) :Transmit at 4 W (High) 1.4 Aat 2 W (Mid) 1.0 Aat 0.5 W (Low) 0.5 AReceive standby : 58 mApower save 32 mAmaximum audio 280 mA (internal speaker)160 mA (external speaker)• Antenna connector : BNC (50 Ω)• Dimensions (projections not included) : 58(W) × 112(H) × 30(D) mm; 2.3(W) × 4.4(H) × 1.2(D) in• Weight (approximately) : 140 g; 4.9 oz (without battery pack, case and antenna)D Transmitter• Modulation system : Variable reactance frequency modulation• Output power (at 7.2 V DC) : High 4 W, Mid 2 W, Low 0.5 W• Maximum frequency deviation : FM (wide) ±5.0 kHzFM (narrow) ±2.5 kHz• Spurious emissions : Less than –65 dBc• External mic. connector : 3-conductor 2.5 (d) mm ( 1⁄10 ˝)/2.2 kΩD Receiver• Receive system : Double-conversion superheterodyne• Intermediate frequencies : 1st: 46.35 MHz, 2nd: 450 kHz• Sensitivity (at 12 dB SINAD) : 0.2 μV typical• Squelch sensitivity (threshold) : 0.11 μV typical• Selectivity : FM (wide) 70 dB typicalFM (narrow) 60 dB typical• Spurious and image rejection : 70 dB typical• Intermodulation : 70 dB typical• Audio output power (at 10% distortion) :Internal speaker 0.75 W typical with a 16 Ω loadExternal speaker 0.4 W typical with a 8 Ω load• External speaker connector : 3-conductor 3.5(d) mm; ( 1⁄8 ˝)/8 ΩAll stated specifications are subject to change without notice or obligation.15 SPECIFICATIONS

/ 59

Related manuals for Icom IC-V80