649DATA OPERATION89 GeneralThe ID-1 allows you to not only for the voice communicationsbut also the data communications with Data mode.The data communication functions as a wireless LAN unitwith up to 128 kbps (theoretical value) of data transmissionspeed. Any data files can be copied to the connected PC.Internet accessing* is also provided with Data mode opera-tion when gateway connection is used.*Contract with a gateway repeater manager is additionally required. PrecautionR WARNING! The saved file(s) in the shared folder maybe modified or deleted, or unknown file(s) may be copied intothe shared folder from the connected station when the trans-mission inhibit is released.Icom Inc. assume no responsibility whatsoever for any dam-ages or lost profits resulting from opportunities for signal com-munications being lost because of the failure, malfunction,poor condition, damage, or data loss of this unit or because ofsuch external causes as power failure. Icom also dismissesall responsibility for demands made by a third party.The transmitting data may be received and decrypted by athird party/station due to the ID-1 transmits data without en-cryption.Connect the ID-1 and PC via Ethernet cable for Data modeoperation in advance. (see p. 17)Disconnect the PC from any other network, another ISP, LAN,etc., is recommended. Network error may be occurred.For data transferring (PC-to-PC communication), a fixed IPaddress must be assigned, the same workgroup setting andhave shared folder must be held for both PCs.Make sure the Ethernet cable, as well as the coupler connec-tions are secure. Loose connections may cause a data trans-mission error during Data operation.

supplied accessories

panel description

I Rear panel

I Microphones (HM-118N)

I Remote controller (RC-24; Optional for some versions)

I Unpacking

I Power supply connections

I Microphone and speaker connections

I Connecting a PC

I COM port conﬁrmation

I Preparation

I Squelch level adjustment (FM mode only)

I Audio level adjustment

I Setting a frequency

basic operation

I Tuning step selection

I Operating mode selection

I Your call sign setting

I Station/Repeater call sign setting

I FM mode operation

I When receiving a Digital call

I Short message function

I Monitor function

I General

I Accessing an FM repeater

I Repeater tone frequency setting

I Offset frequency setting

I Accessing a Digital repeater

I Precaution

I Internet access

I Data transferring

I Low-speed data communication

i general description

i call channel selection

main screen

memory channel screen

I Memory clearing

I Programming memory name

scan operation

I Scan start/stop

I Skip channel setting

i scan resume condition

priority watch

I Pocket beep operation

I Tone/Digital code/call sign squelch operation

other functions

I EMR mode operation

I Break-in communication

I S-meter squelch

troubleshooting

i fuse replacement

specifications and options

Icom ID-1 Instruction Manual

ID-1

explicit definitions

PANEL DESCRIPTION

Rear panel

Mcrophone

function display

Unpackng

installation and connections

power supply connections

DRIVER INSTALLATION

APPLICATION INSTALLATION

BASIC OPERATION

Squelch level adjustment (FM mode only)

VFO and memory mode

Tunng step selecton

tuning step selection

lock function

CALL SIGN SETTING

TRANSMIT AND RECEIVE— VOICE

when calling the desired station

Dgtal voce mode operaton

Montor functon

REPEATER OPERATION— VOICE

General

repeater tone frequency setting

offset frequency

DATA OPERATION

internet access

Low-speed data communcaton

general description

call channel selection

memory clearing

Memory name ndcaton

Scan types

Scan start/stop

skip channel setting

Set mode

pocket beep operation

standby beep

auto repeater

EMR mode operaton

S-meter squelch

CPU reset

fuse replacement

RC-24

MAIN UNIT

LOGIC-1 UNIT

transmitter circuits

PLL CIRCUITS

POWER SUPPLY CIRCUITS

PORT ALLOCATION

PREPARATION

PLL AND CODEC ADJUSTMENT

TRANSMITTER ADJUSTMENT

RECEIVER ADJUSTMENT

main unit

front unit