90111212PRIORITY WATCH Priority watch typesPriority watch checks for signals on a VFO frequency every5 sec. while operating in memory mode. The transceiver has2 priority watch types to suit your needs. You can also trans-mit on the VFO frequency while the priority watch operates.The watch resumes according to the selected scan resumecondition. See previous page for details. NOTES: If the pocket beep function is activated, the trans-ceiver automatically selects the tone squelch functionwhen priority watch starts.MEMORY CHANNELWATCHWhile operating on a VFO fre-quency, priority watch checks fora signal on the selected memorychannel every 5 sec.CALL CHANNEL WATCHWhile operating on a VFO fre-quency, priority watch checks forsignals on the call channel every5 sec.5 sec.VFOfrequency50 msec.Memorychannel5 sec.VFOfrequency50 msec.Callchannel Priority watch operationDD Operating from the applicationqSelect VFO mode; then, set an operating frequency.w Set the watch channel(s).For memory channel watch:Select the desired memory channel.For call channel watch:Select the desired call channel by clicking [CALL], thenclick (left or right) on the [DIAL].e Click [PRIO] to start the watch.• “PRIO” appears during priority watch.• The transceiver checks the memory or call channel every 5 sec.• The watch resumes according to the selected scan resume con-dition. (p. 89)• While the watch is pausing, clicking the [PRIO] resumes thewatch manually.r Click [PRIO] again to stop the watch.ClickAppears during priority watch.

supplied accessories

panel description

I Rear panel

I Microphones (HM-118N)

I Remote controller (RC-24; Optional for some versions)

I Unpacking

I Power supply connections

I Microphone and speaker connections

I Connecting a PC

I COM port conﬁrmation

I Preparation

I Squelch level adjustment (FM mode only)

I Audio level adjustment

I Setting a frequency

basic operation

I Tuning step selection

I Operating mode selection

I Your call sign setting

I Station/Repeater call sign setting

I FM mode operation

I When receiving a Digital call

I Short message function

I Monitor function

I General

I Accessing an FM repeater

I Repeater tone frequency setting

I Offset frequency setting

I Accessing a Digital repeater

I Precaution

I Internet access

I Data transferring

I Low-speed data communication

i general description

i call channel selection

main screen

memory channel screen

I Memory clearing

I Programming memory name

scan operation

I Scan start/stop

I Skip channel setting

i scan resume condition

priority watch

I Pocket beep operation

I Tone/Digital code/call sign squelch operation

other functions

I EMR mode operation

I Break-in communication

I S-meter squelch

troubleshooting

i fuse replacement

specifications and options

Icom ID-1 Instruction Manual

ID-1

explicit definitions

PANEL DESCRIPTION

Rear panel

Mcrophone

function display

Unpackng

installation and connections

power supply connections

DRIVER INSTALLATION

APPLICATION INSTALLATION

BASIC OPERATION

Squelch level adjustment (FM mode only)

VFO and memory mode

Tunng step selecton

tuning step selection

lock function

CALL SIGN SETTING

TRANSMIT AND RECEIVE— VOICE

when calling the desired station

Dgtal voce mode operaton

Montor functon

REPEATER OPERATION— VOICE

General

repeater tone frequency setting

offset frequency

DATA OPERATION

internet access

Low-speed data communcaton

general description

call channel selection

memory clearing

Memory name ndcaton

Scan types

Scan start/stop

skip channel setting

Set mode

pocket beep operation

standby beep

auto repeater

EMR mode operaton

S-meter squelch

CPU reset

fuse replacement

RC-24

MAIN UNIT

LOGIC-1 UNIT

transmitter circuits

PLL CIRCUITS

POWER SUPPLY CIRCUITS

PORT ALLOCATION

PREPARATION

PLL AND CODEC ADJUSTMENT

TRANSMITTER ADJUSTMENT

RECEIVER ADJUSTMENT

main unit

front unit