8010MEMORY/CALL OPERATION10 Programming memory nameEach memory channel can be programmed with an alphanu-meric channel name for easy recognition and can be indicatedindependently by channel. Names can be a maximum of 10characters.DD Programming from the applicationq Display the Memory Channel screen.- Select “Edit Memory Channel(M)...” in View menu.- Click “ ” in tool bar.- Press [F6] key on the PC keyboard.wClick to select “Memory Name” cell of the desired memorychannel.eType the desired 10-character memory name from the PCkeyboard.rTo close the Memory Channel screen, click “ ” on themain screen or repeat the step q.DD Programming with the RC-24q Push [V/M] to select memory mode.w Select the desired memory channel with [DIAL] or keypad.ePush [MN•9] for 0.5 sec. to enter memory name program-ming condition.• 1 short and 1 long beep will sound.rPush [CALL] or [MODE] to select the digit to be edited.• Pushing [CALL] moves the cursor to left; pushing [MODE] movescursor to right.[CALL][MODE]LOWç å A ABName:[MN•9]Click to select thentype the desiredmemory name.
