Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 79 page image

7210MEMORY/CALL OPERATION10DD Selecting with the RC-24q Push [V/M] to select memory mode.• “M” appears beside the channel number indication.• Dial selectionw Rotate [DIAL] to select the desired memory channel.• The programmed memory channels can only be selected.• Microphone’s [UP]/[DN] switches can also be used for the selec-tion.• Keypad selectionwPush [F.INP•L] then push the appropriate digit keys to se-lect the desired memory channel.• Channel number indication disappear after pushing [F.INP•L].• When selecting a channel 00 to 09, push [AFC• •0] first thenpush [AFC• •0]–[MN•9]. Call channel selectionCall channel is pre-programmed memory channel that can beaccessed by simply clicking call channel button.The transceiver has 3 call channels.DD Selecting with the applicationq Click [CALL] to select memory mode.• “CALL” and “C” appear.• Dial selectionwLeft click or right click on [DIAL] to increase or decreasethe call channel number.• Direct channel number inputw Click on [F.INP] to displays keypad screen.eClick the appropriate numeral key ([1], [2] or [3]) to selectthe desired call channel.• PC keyboard can also be used for the direct channel selection.• [CALL] key selectionw Click [CALL] each time to select C1 to C3 in sequence.“CALL” and “C” appear.ClickLOWFMM001294.500[V/M]Appears