Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 66 page image

598 REPEATER OPERATION— VOICE■ Repeater tone frequency settingD Setting from the applicationq Dsplays set mode screen by performng one of the follow-ng operatons.- Select “Edt SetMode(C)...” n vew menu.- Clck “ ” button n tool bar.- Clck [SET].- Press [F7] key on the PC keyboard.w Double clck “Repeater Tone” frequency cell, then selectthe desred frequency from the dsplayed lst.• To close the screen, clck “ ” or repeat the operaton as step q.Double clickAppearsSelect from the above list.D Setting from the RC-24q Push [MODE] several tmes to select FM mode.w Push [TXnh• ] for 0.5 sec. to enter set mode.e Push [MODE] or [TXnh• ] to select “RepeaterTone” tem.r Rotate [DIAL] to select the desred tone frequency.• Total 50 tone frequences (67.0–254.1 Hz) are avalable.t Push [PWR] momentarly to ext set mode.LOWRepeater Tone88.5[MODE][DIAL][TXinh• ]D 1750 Hz tone (European versons only)Some European FM repeaters requre a 1750 Hz tone to beaccessed.For such European repeaters, perform the followng.➥ Whle transmttng (wth PTT), push [UP] on the connectedmcrophone.