Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 77 page image

709DATA OPERATION9■ Low-speed data communicationIn addton to the data communcaton, a low-speed data com-muncaton capablty s avalable.Low-speed data communcatons requre narrow passbandwdth, thus dgtal voce mode s used and provdes a smulta-neous operaton wth voce and data.q Set the desred frequency.w Select DV (Dgtal voce) mode.• Clck [MODE] on the man screen or push [MODE] on the RC-24.e Set another settngs, such as repeater, dgtal codesquelch, transmt output power.r Clck “ ” or select “Ext(X)” n Fle menu to qut the appl-caton.NOTE: The applcaton must be qut durng low-speed dataoperaton. The applcaton and a low-speed data commu-ncaton software cannot be operated smultaneously, dueto both of data passng through the ID-1 USB port.t Start up the low-speed data communcaton applcaton.y Set the applcaton as follows.• Port : The same COM port number as ID-1’s• Baud rate : 19200 bps• Data : 8 bt• Party : None• Stop : 1 bt• Flow control : Xon/Xoffu Push and hold [PTT] to transmt, release to receve thedata.• Refer to the nstructon of the applcaton that how to send or re-ceve data.NOTE:• A communcaton error may occur dependng on the com-bnaton of the OS used, and the low-speed data commu-ncaton applcaton nstalled n your PC.• “Packet-loss” (loosng a part of data) may occur whencommuncatng through nternet network. When “Packet-loss” occurs, [TX/RX] ndcator lghts orange.• ASCII code’s characters are only usable.