Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 96 page image

8911 SCAN OPERATION■ Scan resume condition[The scan resume condton can be selected as tmer or pausescan. The selected resume condton s also used for prortywatch. (pgs. 86, 87)D Setting from the applicationq Dsplay the Set Mode screen.- Select “Edt Set Mode(C)...” n Vew menu.- Clck “ ” n tool bar.- Press [F7] key on the PC keyboard.w Double clck the “Scan Resume Tmer” cell, then selectthe desred scan resume condton from “P-2,” “T-5,” “T-10” and “T-15.”Double clickthen select the desiredscan resume condition.• Resuming conditions• “P-2” : Scan pauses untl the sgnal dsappears and then re-sumes 2 sec. later.• “T-5” : Scan pauses 5 sec. whle recevng a sgnal.• “T10” : Scan pauses 10 sec. whle recevng a sgnal.• “T-15” : Scan pauses 15 sec. whle recevng a sgnal.e To close the Set Mode screen, clck “ ” n tool bar or clck“ .”D Setting from the RC-24q Push [TXnh• ] for 0.5 sec. to enter set mode.w Push [MODE] or [TXnh• ] several tmes to select “ScanTmer” tem.• Select “ON” for “Extension” tem n advance.Scan TimerT-10[MODE][TXinh• ]e Rotate [DIAL] to select the desred scan resume cond-ton. • See “•Resuming conditions” above.r Push [PWR] momentarly to ext set mode.