Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 82 page image

7510 MEMORY/CALL OPERATIOND Programming from the application— Memory Channel screenq Dsplay the Memory channel screen.- Select “Edt Memory Channel(M)...” n Vew menu.- Clck “ ” n tool bar.- Press [F6] key on the PC keyboard.w Clck to select the “Freq.” cell of desred memory or callchannel, then enter the desred operatng frequency fromthe PC keyboard drectly.Click to select, thenenter the desired op-erating frequency.e Double clck the Mode cell n the same memory/call chan-nel, then select the desred operatng mode.Double click theMode cell, thenselect the desiredoperating mode.r Set the other tems as follows.• Repeaters— RPDouble clck the cell, then select thedesred duplex condton.• Repeaters— Offset Freq.Clck to select the cell, then enter the desred offset fre-quency from the PC keyboard drectly.• TONE/TSQL— Tone SelectDouble clck the cell, then select thedesred tone condton.• TONE/TSQL— Repeater Tone, TSQL ToneDouble clck the cell, then select thedesred tone frequency.• Digital— DSQLDouble clck the cell, then select thedesred dgtal squelch condton.• Digital— CodeClck to select the cell, then enter the desred dgtal codenumber from the PC keyboard drectly.