Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 78 page image

71MEMORY/CALL OPERATION10■ General descriptionThe transcever has 105 memory channels ncludng 2 scanedge memory channels (1 par), and 3 call channels. Eachof these channels can be ndvdually programmed wthoperatng frequency (pgs. 35, 36), operatng mode (p. 38),repeater mode (pgs. 57, 58, 61–63), offset frequency (p. 60),subaudble tone encoder or tone squelch and ts tonefrequency (p. 59), Dgtal squelch and ts staton call sgn(pgs. 92–99), repeater call sgns (RPT1 and RPT2; pgs. 61–63), skp nformaton* (p. 88) and memory names (pgs 80–82).*Except scan edges and call channels.■ Memory channel selectionD Selecting with the applicationq Clck [V/M] to select memory mode.• “MEMO” appears.AppearsClick• Dial selectionw Left clck or rght clck on [DIAL] to ncrease or decreasethe memory channel number.• The programmed memores can only be selected.• Direct channel number inputw Clck on [F.INP] to dsplay keypad screen.e Clck the approprate numeral keys to select the desredmemory channel.• When selectng a channel 00 to 09, clck [0] first then clck [0]–[9], or clck [0]–[9] then clck [ENT].• PC keyboard can also be used for the drect channel selecton.• Selecting from Memory Channel screenw Dsplay the Memory channel screen.- Select “Edt Memory Channel(M)...” n Vew menu.- Clck “ ” n tool bar.- Press [F6] key on the PC keyboard.e Double clck, or rght clck the desred channel’s “Select”cell, then select “+ : Move to ths CH” to select the desredmemory channel.• Clck the desred memory channel’s “Select” cell, then press[Enter] whle pressng [Ctrl] key on the PC keyboard.Double click the desiredchannel’s “Select” cell.Select “+ : Move this CH.”