Icom ID-1 Instruction Manual

Also see for ID-1: Addendum Instruction manual Service manual

Contents

Icom ID-1 Instruction Manual Manual pdf 79 page image

7210MEMORY/CALL OPERATION10D Selecting with the RC-24q Push [V/M] to select memory mode.• “M” appears besde the channel number ndcaton.LOWFMM001294.500[V/M]Appears• Dial selectionw Rotate [DIAL] to select the desred memory channel.• The programmed memory channels can only be selected.• Mcrophone’s [UP]/[DN] swtches can also be used for the se-lecton.• Keypad selectionw Push [F.INP•L] then push the approprate dgt keys toselect the desred memory channel.• Channel number ndcaton dsappear after pushng [F.INP•L].• When selectng a channel 00 to 09, push [AFC• •0] first thenpush [AFC• •0]–[MN•9].■ Call channel selectionCall channel s pre-programmed memory channel that can beaccessed by smply clckng call channel button.The transcever has 3 call channels.D Selecting with the applicationq Clck [CALL] to select memory mode.• “CALL” and “C” appear.“CALL” and “C” appear.Click• Dial selectionw Left clck or rght clck on [DIAL] to ncrease or decreasethe call channel number.• Direct channel number inputw Clck on [F.INP] to dsplays keypad screen.e Clck the approprate numeral key ([1], [2] or [3]) to selectthe desred call channel.• PC keyboard can also be used for the drect channel selecton.• [CALL] key selectionw Clck [CALL] each tme to select C1 to C3 n sequence.