957MEMORY/CALL CHANNELS12345678910111213141516171819N Selecting memory/bankname indicationDuring memory mode operation, either the programmedmemory name or bank name can be displayed.q Enter “NAME” in DISP menu. MENU ¶ SET ¶ DISP ¶ NAME (p. 131)(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)w Rotate [DIAL] to select the memory display type.• OFF : Displays the frequency.• MEMORY : Displays the memory name.• BANK : Displays the bank name.e Push [ ](MONI) to return to DISP menu.r Push [MENU ] to return to the previous indication be-fore entering the DISP menu.NOTE: The programmed scan name is displayed duringthe programmed scan selection.[DIAL][EXAMPLE]:Programming the memory name“AIR” into the scan edge channel 3A.[ ][ ][S.MW ]Push [ ].During memory mode, rotate[DIAL] to select 3A.Push [S.MW] to enter selectmemory write mode.Rotate [DIAL] to enter “A,”then [ ].Enter “I” and “R” with[DIAL] and [ ].Push [ ], then rotete [DIAL]to select “M NAME.”Select “B NAME* 1 ” or “SNAME* 2 ” when program-ming the bank name or thescan name, respectively.Push [ ], then push and hold[MW] for 1 sec. to program.*2 S NAME can be set for scan edge channels only.*1 B NAME can be set for bank assigned channels only.[DIAL][MENU ][ ]
