132BASIC OPERATION12345678910111213141516171819D Call channelsCall channels are used for quick recall of most-often usedfrequencies.q Push [M/CALL] several times to select call channels.• Memory/Call channels can be selected in sequence.• “C0” or “C1” appears when call channel is selected.w Rotate [DIAL] to select the desired channel.[M/CALL]• Call channel indicationMR/CALLY/Zz Push and hold [MR/CALL] for 1 sec. to se-lect the call channels.x Push [] or [] to select the desired callchannel.D DR (D-STAR Repeater) modeDR (D-STAR Repeater) mode is used for D-STAR repeateroperation. In this mode, you can select the pre-programmedrepeaters and UR call sign easily.q Push [DR] to select the DR mode.• “ ” appears when the DR mode is selected.[DR]• DR mode indicationAppearw Rotate [DIAL] to select the desired access repeater.• While rotating [DIAL], S/RF meter indicates group number.• Only programmed access repeaters in RPT-L menu can be se-lected. See p. 34 for RPT-L (repeater lists) programming details. MENU ¶ RPT-L ¶ ADD-L (p. 34)NOTE: If All reset is performed, “NO RPT” indication ap-pears. In this case, you should program the repeater listbefore operating the DR mode.
