14511DTMF MEMORY ENCODER12345678910111213141516171819N DTMF speedThe rate at which DTMF values in memory send individualDTMF characters can be set to accommodate operatingneeds.q Enter “DTMF-S” in DUP.T menu. MENU ¶ DUP.T ¶ DTMF-S (p. 122)(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)[DIAL][MENU ][ ]wRotate [DIAL] to select and set the desired speed asshown in the table below, then push [ ](MONI).ePush [MENU ] again to exit DUP.T menu and return tothe frequency screen.DISPLAY INTERVAL SPEED100 100 msec. 5.0 cps200 200 msec 2.5 cps300 300 msec. 1.6 cps500 500 msec. 1.0 cpscps=characters/secN Clearing a DTMF memoryAn unwanted DTMF memory can be cleared (erased).q Push and hold [DTMF](MONI) for 1 sec. to enter the DTMFset screen.w Rotate [DIAL] to select “DTMF-M,” then push [ ](MONI).e Rotate [DIAL] to select the desired DTMF memory chan-nel to be cleared, then push [ ](MONI).r Rotate [DIAL] to select “--,” then push [ ](MONI) to clearthe selected DTMF memory channel.[DIAL][MENU ][ ] After clearing the DTMF memory.Rotate [DIAL]When entering DTMF programming mode.t Push [MENU ] to exit the DTMF set screen.
