15313OTHER FUNCTIONS12345678910111213141516171819N Microphone keysThe supplied HM-133’s [F-1] and [F-2] keys memorize thetransceiver conditions.The [UP]/[DN] keys of the standard or an optional micro-phone (other than the HM-133) can be assigned functions likethe function keys on the transceiver’s front panel.D [F-1]/[F-2] keys on the HM-133The following conditions can be memorized into [F-1] and[F-2] keys, independently.Operating frequency, Operating mode selection (FM/FM-N/AM/AM-N/DV), Repeater setting (offset direction and frequencyoffset, tone ON/OFF and tone frequency) , Tuning step, Tone/DTCS squelch (ON/OFF, frequency/code and polarity) , Callsigns (station and repeater1/2), Call sign/digital code squelch(ON/OFF and digital code)The set mode settings or transmit output power level can ad-ditionally be memorized with [FUNC]+[F-1]/[F-2] key opera-tion, independently.SCAN set mode settings (except program scan link set-tings), FUNC set mode settings (except Mic UP/DNsettings), DISP set mode settings, SOUNDS set mode set-tings, DV SET mode settings (except BK or EMR settings),GPS.SET settings, GPS alarm areas (ALM1, ALM2), Sen-tence formatter settings, GPS-A set mode settings, Trans-mit output power level[F-1]/[F-2]± Programming the band conditionSet the desired contents of each condition,then push and hold [F-1]/[F-2] for 1 sec.• 3 beeps sound.± Recalling the band conditionPush [F-1]/[F-2] momentarily.± Programming the bands condition([FUNC]+)After setting the desired contents of eachcondition, push [FUNC] then push and hold[F-1]/[F-2] for 1 sec.• 3 beeps sound.± Recalling the bands condition ([FUNC]+)Push [FUNC] then push [F-1]/[F-2] momen-tarily.D [UP]/[DN] keys on a microphones(other than the HM-133)The following functions are assigned to the [UP]/[DN] keys onthe other microphones (HM-103/HM-154) in set mode.• Default setting[UP] : channel up; push and hold to start scan, push again tostop scan.[DN] : channel down; push and hold to start scan, push againto stop scan.See page 129 for assignable function details.