Icom iC-A14 Instruction Manual

Also see for IC-A14: Price list Information Service manual Service manual Instruction manual

Icom iC-A14 Instruction Manual Manual pdf 17 page image

124MEMORY OPERATIONMemory channel selection■The IC-A14 has 200 memory channels (20 channels in 10banks; default setting) and the IC-A14S has 100 memory chan-nels for storing often-used frequencies.q Push [MR] to select the memory mode.• The memory mode icon appears and a memory channel num-ber is briefl y displayed .• The memory bank number is also displayed on the IC-A14.Using [Y]/[Z]:w Push [Y]/[Z] to select the desired memory CH number.• The memory channel number is briefl y displayed, then the pro-grammed frequency (or memory name, if programmed) is dis-played.• If no memory channel is programmed, no memory channel canbe selected.Using the Keypad— IC-A14 only:w Push 2 appropriate digit key (00 to 99, depending on thebank setting) to select the desired memory channel num-ber, then push [ENT].• The memory channel number is briefl y displayed, then the pro-grammed frequency (or memory name, if programmed) is dis-played.• If no memory channel is programmed in the selected BANK, nomemory channel can be selected.Memory bank selection■(Available with the IC-A14 only)A total of 200 memory channels in the IC-A14, are dividedinto bank (up to 10 banks are selectable, depending on thesetting) for simple memory grouping.q Push [MR] to select the memory mode.w Push [FUNC], and push [BANK](3) to enter the bank se-lection mode.e Push [Y]/[Z] or anappropriate digit key([0] to [9]) to selectthe desired memoryBANK number, thenpush [ENT].r Push [Y ]/[Z ], or2 appropriate digitkeys and then [ENT]to select the desiredmemory channel.Appears when thememory mode is selected.Appears when the bankselection mode is selected.Keypad[FUNC][Z][ENT][BANK](3)[MR][Y]12345678910111213141516171819