Icom iC-A14 Instruction Manual

Also see for IC-A14: Price list Information Service manual Service manual Instruction manual

Icom iC-A14 Instruction Manual Manual pdf 20 page image

154 MEMORY OPERATIONMemory names■The memory channel can display an 8-character name in-stead of the programmed frequency.D Programming memory namesq Set the desired frequency in the frequency mode. (p. 8)w Enter the select memory write mode.• For the IC-A14; push [FUNC] then push [MW](MR).• For the IC-A14S; hold down [MR] for 1 second.e Select the desired memory channel to be programmed bypushing [Y]/[Z] (or on only the IC-A14, push the keys on thekeypad then [ENT]).r Push [MR] momentarily to enter the memory name pro-gramming mode.• “-- -- -- -- -- -- -- --” appears and 1st digits blink.• Available charactersFor the IC-A14t Push the appropriate digit key several times to select thedesired character, as shown to the left.• To move the cursor forwards or backwards, use [Y]/[Z].• The cursor automatically moves forward when a different key ispushed.• To erase a character, overwrite with a space (displayed as“_”).y Push [ENT] to program the name and frequency at thesame time.• Return to the frequency display.• If no name is programmed, the programmed frequency is dis-played.• To clear the entered memory names, push [CLR] before push-ing [ENT].For the IC-A14St Push [Y]/[Z] several times to select the desired character.• To move the cursor forwards, use [MR].• To erase a character, overwrite with a space (displayed as“_”).y Hold down [MR] for 1 second to program the name andfrequency at the same time.• Return to the frequency display.• If no name is programmed, the programmed frequency is dis-played.• To clear the entered memory names, push [CLR] before hold-ing down [MR] for 1 second.KEY CHARACTER KEY CHARACTER[1] 1, Q, Z [6] 6, M, N, O,[2] 2, A, B, C [7] 7, P, R, S[3] 3, D, E, F [8] 8, T, U, V[4] 4, G, H, I [9] 9, W, X, Y[5] 5, J, K, L [0] 0, _ (space), –