Icom iC-A14 Instruction Manual

Also see for IC-A14: Price list Information Service manual Service manual Instruction manual

Icom iC-A14 Instruction Manual Manual pdf 24 page image

Weather channel scan■(Available with the IC-A14 only)q Push [FUNC], then push [WX](7) to select a weatherchannel mode.w Set squelch to the point where noise is just muted with[SQLY]/[SQLZ].e Push [FUNC], then push [SACN(2) to start the scan.• When a signal is received, the scan pauses until it disappears.• To change the scanning direction, push [Y]/[Z].r To stop the scan, push [CLR].Memory scan■NOTE: Program 2 or more memory channels with “TAG”setting to start memory scan.q Push [MR] to select the memory mode.• For the IC-A14, select the desired BANK if desired. (p. 12)w Push [SQLY]/[SQLZ] to set the squelch level to the pointwhere noise is just muted.For the IC-A14e Push [FUNC], then push [SCAN](2) to start the scan.• When a signal is received, the scan pauses until it disappears.• To change the scanning direction, push [Y]/[Z].For the IC-A14Se Hold down [Y]/[Z] for 1 second to start the scan.• When a signal is received, the scan pauses until it disappears.• To change the scanning direction, push [Y]/[Z].195 SCAN OPERATIONDecimal point blinks duringscan.[FUNC][SCAN](2)[WX](7)[Y][Z]Decimal point blinks duringscan.[FUNC][MR][SCAN](2)[Y][Z]r To stop the scan, push[CLR].