Icom iC-A14 Instruction Manual

Also see for IC-A14: Price list Information Service manual Service manual Instruction manual

Icom iC-A14 Instruction Manual Manual pdf 39 page image

348CLONING12345678910111213141516171819Cloning allows you to quickly and easily transfer the pro-grammed data from one transceiver to another transceiver,or, data from PC to a transceiver using the optional CS-A14cloning software.D Transceiver to transceiver cloningq Connect the OPC-474 CLONING CABLE to [MIC/SP] jackof the master and sub transceivers.• The master transceiver is used to send data to the sub trans-ceiver.w While pushing and holding [MR], rotate [VOL] to entercloning mode (for operating the master transceiver only).• “CLONE” appears and the transceivers enter the clone standbycondition.e Push [PTT] on the master transceiver.• “CL.OUT” appears in the master transceiver’s display.• “CL.IN” appears automatically in the sub transceiver’s display.r When cloning is fi nished, turn power OFF, then ON againto exit cloning mode.NOTE: Transceiver to transceiver cloning between IC-A14and IC-A14S cannot be performed.OPC-474Master Subto the speakerconnectorto the speakerconnectorMaster transceiver’sindication during cloneSub transceiver’sindication during clone