216 OTHER FUNCTIONSHome function■The home function is convenient if you want to return thetransceiver to default settings without memory channels.The following transceiver’s settings will return to the defaultvalue;• Operating mode (Frequency, memory or weather* channel modewith frequency or channel number, including bank*)• Duplex setting • ANL setting • Key touch beep• Squelch level • Side tone level • Microphone gain• Internal microphone usage • Time-Out timer settingThe default settings can be modifi ed to suits your preferenceusing with the optional cloning software, CS-A14.¬ Hold down [CLR] for 2 secondsto return the transceiver into thedefault setting.Accessing 121.5 MHz emer-■gency frequency(Selectable on only the IC-A14)The IC-A14 can quickly be set to the 121.5 MHz emergencyfrequency. This function can be activated even when the keylock function is in use.q Push [FUNC] then [121.5](0) to call the emergency fre-quency.w Push [CLR] to return to the frequency mode.[CLR]Emergency initial, “E,” ap-pears with the frequency[FUNC][121.5](0)*For only the IC-A14