JBL GTS100X Owner's Manual

Also see for Grand touring series: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

JBL GTS100X Owner's Manual Manual pdf 13 page image

13Useelisee”ee-toThisOff”isepli-hehewithheevel7. Fuse – 20-amp ATC-type fuse.8., 9., 10. Power Connector –Connection for included powerwire harness. See “Power SupplyConnections” on page 15 and thewiring diagram on page 14 forinformation on wire color codesand proper connections.11. Speaker Output Connector –Connection for included speakeroutput harness. See “SpeakerConnections” section on page 20for information on wire colorcodes.12. Power Indicator LED – Powerindicator light glows for normaloperation when the amplifier isactivated by either the remote orcommon sense turn-on circuits.Mounting InstructionsPlace the amplifier in the installa-tion location. Use a pen or pencilto mark the four mounting screwhole locations. Set the amplifieraside and drill the holes for themounting screws. (Note: If thesurface you are mounting the ampto is covered with carpeting orupholstery, cut a small “x” in thematerial at each screw hole loca-tion before drilling the holes.This will help prevent tearing orstretching of the material andkeep carpet fibers from beingpulled out.) Set the amplifier inposition and align the mountingholes with the holes previouslydrilled. Put washers on the foursheet metal screws provided anddrive them into the mountingpanel. Tighten the screws evenlyuntil the unit is solidly mounted.