JBL GTS100X Owner's Manual

Also see for Grand touring series: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

JBL GTS100X Owner's Manual Manual pdf 18 page image

ono –Inputstereoare con-ft anda cen-speakerode.page 21ons” sec-Speaker-Level InputConnectionsWhen speaker-level signal is usedto drive the GTS100x, the signalgoes into the amp through a spe-cial four-wire harness/connector(see the “Controls and Connec-tors” section, page 12). If exten-sion wires are needed betweenthe head unit output and theamplifier unit, use conventionalspeaker wire. Keep the wiringinside the passenger and trunkcompartments and make thewires as short as possible. Allconnections should be securelycrimped or soldered and insu-lated with heatshrink tubing.Use the color code of the inputharness wires and the identifica-tion on the radio/tape deck outputwires to be sure that left andright channels are correctly con-nected and the positive/negativepolarity of each channel is con-nected correctly. For example,the left positive output of thehead unit must be connected tothe left positive input of theGTS100x. The color codes for thespeaker level input harness areas follows:Speaker-Level Input Color CodesLeft (+): WhiteLeft (–): White withBlack StripeRight (+): GrayRight (–): Gray withBlack Stripe