Jacuzzi oortable spa Owner's Manual

www.clearcreekspas.comwww.clearcreekspas.comActivate the waterfall feature by first turning on theJETS, HTR/FILTER, or FILTER function, then rotatedownward the flow control lever located on the left sideof the spout. Use this lever to adjust the amount of waterflowing through the Water Rainbow spout. Thewaterfall effect will be greatest in the JETS mode.Turning off the flow at the fully adjustable jets willdramatically increase the Water Rain- bow flow.CAUTION: The water circulating through theWater Rainbow spouts is not fresh water andtherefore is not suitable for drinking.WATER RAINBOW SPOUTAir BlowerThe Quantum Plus features a built-in air blower andfactory drilled air holes in the seats of the spa.The blower sends air to a channel located under thespa’s seats; this air is distributed through the air holes, andas the pressurized air is released from the holes, tinybubbles are formed. These bubbles travel upward throughthe water and expand until they reach the surface and burst.The exciting visual effect of the bursting bubbles contrib-utes to the overall hydromassage experience.Activate the blower by pushing the ACC switch.FiltrationWhen you are ready to leave the spa, push the SYSTEMswitch button to turn off the whirlpool. Then select the HTR/FILTER mode. Adjust the TEMP CONTROL knob to thetemperature at which you want the water maintained. Inthis way, the water will be filtered when the heater goes onto maintain the temperature. Running the filter pump for atleast two hours per day is sufficient. Another way to be surethe water will be filtered is to turn the SYSTEM off and setthe timer in the System Control Module to turn the systemon at a preset time everyday. Maintain the waterlevel to theindicator mark on the skimmer/filter frame. (See page 8 forinstructions on setting timer.)11