www.clearcreekspas.comwww.clearcreekspas.comINSTALLATIONImportant: Read complete instructions before beginning installation.Positioning Your SpaBecause your Quantum Plus spa is a portable, you can locate it just about anywhere you wish—on a deck, patio, or evenindoors. Just be sure to position it above ground in an area with good drainage and on a level, continuous surface whichcan support the weight of the spa when filled with water and people; this weight is approximately 5252 lbs. (92 lbs. per sqft). You must also provide access to the spa’s equipment for service and general maintenance.SERVICE ACCESS18"50"Electrical RequirementsYour Quantum Plus, as it comes from the factory,requires a 230 VAC 50 AMP 4-wire grounded type electri-cal service and must be in a separate circuit having noother appliance connected in that circuit. If you do not havethis kind of circuit, a qualified electrician should be calledin to install the necessary wiring. Inadequately sized wiringor locating the spa too far from the main service panel maycause a voltage drop which might cause the unit tomalfunction and bring about permanent damage to thespa’s electrical system. The circuit must also have a groundwire in order to take advantage of the designed-in safetyfeatures of the spa. Bond according to procedure describedon the next page. Caution: Without proper grounding andbonding, a system malfunction may cause fatal shock.