Jandy ePump Installation Manual

Contents

Jandy ePump Installation Manual Manual pdf 11 page image

Page 113.5.4 Timer Overriding a Manual OnIf the pump is started manually at a speed that has beenprogrammed with a timer, the pump will be stopped by thetimeclock at the programmed off time. A clock icon appearson the display when the timer has assumed control of the offtime.Section 4. Service Setup OptionsThe service setup menu allows the installer to set variousoperating parameters, view fault history, and restore factorydefaults.Parameters that may be modified and set in the service setupmenu include:Priming speed and duration.•Minimum and maximum pump speeds.•"• " eStar speed.Pump Freeze Protect operation.•4.1 Entering Service SetupNOTE The ePump TM user interface must be in the OFFmode (all LED's lights must be off) before enteringthe user setup mode. While in setup mode the userinterface will return back to the OFF mode after one(1) minute since the last key press.To enter the service setup menu, press and hold MENU, thenpress and hold the "" and preset "4" keys. Hold all three(3) keys down for five (5) seconds. To exit, press any presetbutton.2 3 4ePUMPMENUPRESS PRESET OR MENU12:00AM PUMP IS OFF4.2 Minimum and Maximum PumpSpeedsThese speeds are considered global settings across the entirecontroller, and create the range of allowable speed that maybe sent to the ePump™.To set the minimum speed, from the service setup menu,select SET MIN LIMIT using the arrow keys. Press MENU.Using the arrow keys, set the minimum speed to the desiredvalue. Press MENU to accept and store.2 3 4SET MIN LIMITRPM: 600ePUMPMENUTo set the maximum speed, from the service setup menu,select SET MAX LIMIT using the arrow keys. Press MENU.Using the arrow keys, set the maximum speed to the desiredvalue. Press MENU to accept and store.2 3 4SET MAX LIMITRPM: 3450ePUMPMENU4.3 Load DefaultsTo restore factory default settings to the controller, fromthe service setup menu, select LOAD DEFAULTS. PressMENU. Using the arrow keys, select YES. Press MENU torestore factory default settings.2 3 4LOAD DEFAULTSYESePUMPMENU