Jandy ePump Installation Manual

Contents

Jandy ePump Installation Manual Manual pdf 14 page image

Page 145.3 General LabelsUsing the arrow keys, select a general label from the list toassign to the Preset. Press MENU to assign the label to thePreset.2 3 4ePUMPMENULABEL PRESETFILTRATION5.4 Custom LabelsIn the custom label mode, the controller displays a flashingcursor at the character position to be changed. Using thearrow keys, change the character as desired. Press MENU toaccept the change and advance to the next character position.Press any preset key "" through "4" to return to theprevious cursor position.2 3 4ePUMPMENULABEL PRESET1:PRESET 1Continue this procedure until the end of the label is reached.The new label is saved when MENU is pressed at the lastcharacter position.5.5 Display Light ControlThe controller’s display is equipped with a backlight to aidviewing in low light conditions.From the setup menu, select DISPLAY LIGHT. PressMENU. Using the arrow keys, select the desired operatingmode for the display backlight:LIGHT OFF: Turn off display backlight.LIGHT ON: Turn on display backlight.2 MIN TIMEOUT: Turn on display backlight, with automaticturn-off after two (2) minutes since the last key press.2 3 4ePUMPMENUSELECT USER SETUPDISPLAY LIGHT5.6 Language SelectionFrom the setup menu, select LANGUAGE using the arrowkeys. Press MENU. Using the arrow keys, select the desiredlanguage. Press MENU to save the selection.2 3 4ePUMPMENUSELECT USER SETUPLANGUAGE5.7 Run Duration (Presets 3 and 4 Only)Presets "3" and "4" may be programmed to run for a specifiedduration after being manually started. This run durationis programmable from 30 minutes to eight (8) hours, inincrements of 30 minutes. A setting of 0:00 disables the runduration feature, allowing the preset to run indefinitely.From the setup menu, select RUN DURATION. PressMENU. Using the arrow keys, select the preset to beprogrammed. Press MENU. Set the desired run duration forthe preset using the arrow keys. Press MENU to accept.2 3 4ePUMPMENUSELECT USER SETUPRUN DURATION

/ 16

Related manuals for Jandy ePump