Your refrigerator has either Spillsaver TM or non-sealedshelves. Spillsaver TM shelves have a spill retainer edgewhich allows for easier clean up and some areequipped with a roll out feature. To roll out (selectmodels}, grasp the front of the shelf and pull forward.Push in the shelf to return to the original position.To Remove a Shelf:Slightly tilt up the front and lift upthe rear of the shelf, then pull theshelf straight out.To Lock the Shelf Unto Another Position:Tilt up the front edge of the shelf.Insert the hooks into the desired frame openings andlet the shelf settle into place.Be sure the shelf is securely locked at the rear.The Crisper Top serves as the lower fresh food shelf.To Remove the Crisper Top:, Remove crisper drawers as indicated on page 10., Place hand under the frame to push up the glass. Liftglass out., Lift frame from refrigerator liner rails., To install, repeat above instructions in reverse order.Door StorageDairy CenterThe Dairy Center providesconvenient door storage forspreadable items such as butter and margarine. Thiscompartment can be moved to different locations toaccommodate storage needs. To use the dairycompartment, raise the cover.To Remove:• Raise the cover, pull upward and tilt out.To Install:• Reverse above procedure.Door BucketsDoor Buckets can be moved to meetstorage needs.To Remove:• Slide bucket up and pull straightout.To Install:• Slide bucket in and down until firmly seated in thedoor liner.Beverage Chiller TM[select models]The Beverage Chiller TM keepsbeverages and other items cooler thanthe rest of the fresh food section. A coldair inlet allows air from the freezersection to pass into the beverage chiller.The Beverage Chiller TM control is locatedon the left wall of the fresh food j,compartment. The control adjusts the ._ ......amount of cold air allowed in to the _'<beverage chiller. Turn the controlclockwise for a colder temperature. _" .....