Jenn-Air JBR2086HES Use & Care Manual

Contents

To Remove Beverage ChillerTM:First remove the pick off shelf tothe left of the Beverage Chiller TM.Firmly hold each side of beveragechiller, lift up and away from doorliner.To Unstall Beverage ChillerTM:Reverse above procedure.Cold air diverted into the Beverage Chiller TM candecrease the main refrigerator temperature.Refrigerator control may need to be adjusted.Crisper DrawersThe Crisper Drawers provide a higher humidityenvironment for fresh fruit and vegetable storage.ControlsThe Crisper Controls regulate the amount of humidityin the crisper drawer. Slide the control towards theFruit setting when storing produce with outer skins.Slide the control towards the Vegetables setting whenstoring leafy produce.Vegetables Fruit ITo Remove:• Pull drawer out to full extension. Tilt up front ofdrawer and pull straight out.To Install:• Insert drawer into frame rails and push back intoplace.Note• For best results, keep the crisper drawers tightlyclosed.Gourmet Bay TMThe Gourmet Bay TM drawer is a full-width drawer withadjustable temperature control. This drawer can beused for large party trays, dell items, beverages ormiscellaneous items.ColdestGourmet BayTM Control -,The control, located on the right of the drawer,regulates the air temperature inside the Adrawer. Set control to "cold" to provide normal AArefrigerator temperature. Use the "coldest" ,,setting for meats or other dell items. ColdNotes• Cold air directed to the Gourmet Bay TM candecrease refrigerator temperature. Refrigeratorcontrol may need to be adjusted.• Do not place leafy vegetables in the GourmetBayTM drawer. Colder temperatures could damageleafy produce.To Remove:• Lift lid. Pull drawer out to full extension. Tilt thedrawer front up and pull straight out.To Install:• Push metal glide rails to the back of the refrigerator.Place drawer onto rails and slide drawer back until itfalls into place.Gourmet Bay TM DividerThe Gourmet Bay TM Divider is used toorganize the Gourmet Bay TM into sections.Note• For easiest removal and replacement of the divider,remove drawer. If removal is not possible, pulldrawer open to it's fullest extension.To Remove:• Raise front of divider to unhook divider from rearwall of drawer, and pull out.To Install:• Hook back of divider over rear wall of drawer andlower into place.10