Jenn-Air MW2430 Use & Care Manual

Also see for JMW2327: Use & care guide Use & care guide Use & care guide Use and care guide Use & care guide

Contents

84. Select SAVE. This will return you to the Sound settings menu.5. From the Sound menu, touch the quickset pad next to ButtonVolume.6. Adjust Button volume by touching the left quickset pad todecrease the volume and the right quickset pad to increasethe volume. To turn Button Volume off, touch the left quicksetpad until Off is reached.7. Select SAVE. This will return you to the Sound menu.8. From the Sound menu, select ON or OFF on Startup/Shutdown Sounds.9. Press BACK to return to the Setup menu.Screen Appearance1. From the Setup menu, touch the quickset pad next to ScreenAppearance.2. From the Appearance menu, touch the quickset pad next toBrightness.3. Adjust the screen brightness by touching the left quicksetpad to select dimmer and the right quickset pad to selectbrighter.4. Select SAVE. This will return you to the Screen Appearancesettings menu.5. From the Screen Appearance menu, select ON or OFF onAnimation. When on, the animation (gradient and heat waves)are shown while the oven is heating.6. From the Screen Appearance Menu, touch the quickset padnext to Theme.7. Select an appearance to match your oven: Dark/Blue, Light/Blue, Dark/Orange, Bronze/White.8. After selecting a theme, a message will show: “You haveselected a new theme. The oven will reset momentarily.Please wait....” It will take 1 minute to restart with the newsettings set.Language1. From the Setup menu, touch the quickset pad next toLanguage.2. From the Language menu, select your language: English orFrench. This will return you to the clock display screen.Temperature Units1. From the Setup Menu, touch the MORE button until TempUnits appears.2. Touch the quickset pad next to Temp Units.3. From the Temp Units menu, select temperature units:Fahrenheit or Celsius.4. Select SAVE. This will return you to the Setup menu.Service Information1. From the Setup Menu, touch the MORE button until ServiceInfo appears.2. Touch the quickset pad next to Service Info.3. The JennAir service phone number and website are displayedin the screen.4. Depending on the oven model, a Demo Mode is available.This mode will allow you to make selections with variousoptions without heating the oven. Select ON/OFF to activateor deactivate the function. When On, it will be indicated at thebottom of the screen.5. See “Assistance or Service” section for additionalinformation.6. Select SAVE to exit screen and return to Setup Menu.Sabbath ModeThe Sabbath Mode sets the oven to remain in a Bake setting untilturned off. A timed Sabbath Mode can also be set to keep theoven on for only part of the Sabbath. When the Sabbath Mode isset, only the number and Start keys will function, no tones willsound, and the displays will not show messages or temperaturechanges.When the oven door is opened or closed, the oven light will notturn on or off, and the heating elements will not turn on or offimmediately.If a power failure occurs when the Sabbath Mode is set, theoven(s) will remain in Sabbath Mode but will no longer be activelycooking. When power returns, the display will initially show theJenn-Air start-up screen. After a short delay, the display willreturn to the Sabbath Mode enable screen. Touch the quicksetpad next to “On” to return to the Sabbath Mode setup screen ortouch the quickset pad next to “Off” to disable Sabbath Modeand return to the clock display screen.To Use Sabbath Mode:1. From the Select mode screen, touch the MORE button untilthe Setup Menu appears.2. From the Setup Menu, touch the MORE button until SabbathMode appears. Press the quickset pad next to SabbathMode.3. From the Sabbath Mode menu, read the instructions on thescreen and press the quickset pad next to On to turn SabbathMode on.NOTE: Sabbath Mode disables the 12-hour shutoff. All lightsand displays are disabled, so that no visible activity takesplace when the oven door is opened.4. On double ovens, select the cavity to set up by pressing thequickset pad next to Upper or Lower.5. Select Oven Temperature. Use the numbered keypad to entera desired cooking temperature. The temperature must bebetween 170°F (77°C) and 550°F (288°C) or the defaulttemperature appears on the screen.6. Select Next by pressing the quickset pad next to it.7. If a programmed Cook Time is desired, enter a Cook Time byusing the number keypad. The time length may not exceed12:00:00. When the timer ends, the oven cavity will stopheating.8. Select Next by pressing the quickset pad next to it.9. On double ovens, repeat steps 1-8 to set the second cavity, ifdesired.10. To set a Delayed Start, press the quickset pad next to DelayStart. See the “Delay Start” section for additional information.11. Press START to begin heating the oven.12. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWERon double oven models) to turn off the oven.WARNINGFood Poisoning HazardDo not let food sit in oven more than one hour beforeor after cooking.Doing so can result in food poisoning or sickness.