60 English 5.906-269.0 Rev. 00 (03/11)6.9.3 Polishing (without vacuuming)Initial use LED "Battery" (green)Shutting downSwitch the programme selector switch (S2) to position “wet scrubbing without vacuuming" Detergents active, if set to "1" in the setup menu FACT active if set to "1" in the setup menuLED "Battery" (green) Red LED "Fault" is glowing continuous-ly After approx. 10 seconds of overload,the following will be shut off– Brush motor– Solenoid valve water– Dosing pump detergent (optional) Red LED "Fault" is blinking Switch the programme selector switch(S2) to position “OFF and perform star-tupBrush motor (M1) readyDeadman switch (S3)actuated?NoYesBrush motor (M1) active- Check the solenoidvalve.Yes Brush motor overload?No(Option) detergentswitch (S5) on?NoYesDosing pump (optional)on
