72 English 5.906-269.0 Rev. 00 (03/11)8.2.3 Display setup manu (W Bp Pack)Display parameter setup (exclusively for models with display and info button),sequence and factory settings, 10/09Parameter Factorysettingmin:step:max Remarks Se-quenceServiceaccessMaschinetype:R1 BR 45/40BD 45/40Modell variant. With the BD, the FACToperator menu is hidden, displayed forBR.1 XDischargevoltage: 21.0V21.0 V 19.0..0.122.5 V Discharge final voltage at which allunits shut off to protect the battery.The control display signals the requiredbattery charging by glowing RED.2 XStandby: 30min30 min 0min:30min:60minIf a cleaning programme is preselectedand if no unit is running, the machinewill shut down into idle mode after thistime has elapsed.For a new startup, the programme se-lector switch must be set to "OFF" or akey switch reset must be performed.3 XSuction trail:10 s10s 0s:5s:60s Trail time of the suction turbine, if youswitch from one vacuum programme toa programme without vacuuming or toOFF.4 XSpeed:--- 3 00:01:05 Max. drive speed in transport mode,v=0.67 km/h (n+1) n=number of bars.5 XAccelerationramp: 33 00:01:09 Acceleration of the drive motor whenstarting, highest acceleration: 96 XBrush ramp: 9 9 00:01:09 Acceleration of the brush motor, high-est acceleration: 97 XCleanSpd-Edit: 11 0=N, 1=Y Show CLEANSPEED menu. 8 XSUCTred.Ed-it: 11 0=N, 1=Y Bit to activate the turbine speed opera-tor menu.0 = Speed adjustment hidden, turbineworks at 100% nominal speed1 = speed adjustment is displayed.9 XDOSE-Edit: 1 1 0=N, 1=Y Bit to activate the DOSE operatormenu.0 = DOSE menu hidden, dose works at1.0% fixed for Pack models1 = DOSE menu is displayed.10 XPower driv-ing: 15 A15A 10 A:1 A:40 A Max. regular power of the drive motor.In case of overload, the power is limitedto the set up value for 30 seconds untilthe shut-off with fault message occurs.A new startup requires OFF or a keyswitch reset.11 X
