English 5.906-269.0 Rev. 00 (03/11) 678 Basic settings8.1 Factory settingsPROCESS SWITCH MENU, factory setting BR/BD 45-55/40 C/W Bp (Pack) - Series 02/10Process nameParameterFactory settingmin:step:maxRemarksBR/BD 45-55/40 C BpBR/BD 45-55/40 C Bp PackBR/BD 45-55/40 W Bp PackTransportdrive- - - No adjustment possibilitiesplanned.Adjustable (X = yes)ScrubbingsuctionWet scrub-bingDOSE 1,0% 0,0:0,5:3,0% The DOSE can be switched offvia the menu itemDOSE_Edit=0 in the setupmenu.If the bit is set, the dosing canbe varied according to the ad-justment range.This mod-el doesnot sup-port adosingpumpconnec-tion1,0% XScrubbingsuctionWet scrub-bingPolishingPolish suc-tionFACT PowerCleanPower CleanWhisperCleanFine CleanIn the setup menu by selectingthe appliance type: D FACT de-activated The disc brush rotatesat 90% speed.Via appliance type: R is availa-ble to FACT as follows:Power-Clean =100% speedWhisper-Clean = 65% speedFine-Clean = 40% speedPower Clean only X forBR,90%fixedforBDScrubbingsuctionWet scrub-bingVacuumingPolishingPolish suc-tionCleanspeed6 bars 1:1:6 s Speed of the traction model, assoon as the drive switch is ac-tive and the deadman switchhas been actuated.1 bar = 0.8 km/h2 bars = 1.6 km/h ...6 bars = 4.0 km/hwithout traveldriveXScrubbingsuctionVacuumingPolish suc-tionVACU-UMPower PowerWhisperYou can switch on and later ad-just the access to the turbinespeed adjustment in the setupmenu via SUCTred.Edit:1.Use 0 to force the operatingmenu to switch off in the setupmenu; the turbine is then oper-ated at nominal speed.High = 100% speedWhisper = 60% speedOnly 100% nomi-nal speed possi-ble (=High)X
