English 5.906-269.0 Rev. 00 (03/11) 636.9.6 Polishing (with vacuuming)Initial use LED "Battery" (green)Shutting downSwitch the programme selector switch (S2) to position “Polishing with vacuuming" Suction turbine (M2) active Speed reset suction turbine speed (M2) active, if set to "1" in the setup menu (option only) FACT active if set to "1" in the setup menuLED "Battery" (green) Red LED "Fault" is glowing continuous-ly After approx. 10 seconds of overload,the following will be shut off– Brush motor– Solenoid valve water– Dosing pump detergent (optional) Red LED "Fault" is blinking Switch the programme selector switch(S2) to position “OFF and perform star-tupBrush motor (M1) readyDeadman switch (S3)actuated?NoYesBrush motor (M1) activeYes Brush motor overload? No
