KENT Razor Plus 24C Instructions For Use Manual

Also see for 908 7038 020: Parts list

Contents

INSTRUCTIONS FOR USE2 Razor™ Plus 24D-26D-28D / Razor™ Plus 24C-28C — 909 5428 000(2)2005-01INTRODUCTIONMANUAL PURPOSE AND CONTENTSThe purpose of this manual is to provide the operator with allnecessary information to use the machine properly in a safeand autonomous way. It contains information about technicalcharacteristics, operation, machine storage, maintenance,spare parts and safety conditions.Before carrying out any procedure on the machine, theoperators and technicians in charge of the maintenance mustread this manual carefully. Contact an authorized KentService Center in case of doubts regarding the interpretationof the instructions and for any further information.TARGETThis manual is intended as a guide for the operator and thetechnicians qualified to perform the machine maintenance.The operators must not carry out operations reserved forqualified technicians. Kent will not be answerable fordamages coming from the non-observance of this prohibition.HOW TO KEEP THIS MANUALThe Instructions for Use Manual must be kept near themachine, inside an adequate case, away from liquids andother substances that can cause damage to it.IDENTIFICATION DATAThe machine model and serial number are marked on theplate on the tank and can be read from the outside (1, Fig. C).The machine model year is shown after the Date Code on theserial plate (A05 means January 2005).This information is useful when requiring machine spareparts. Use the following table to write down the machineidentification data for any further reference.OTHER REFERENCE MANUALSElectronic Battery Charger Manual, which is to be consideredan integral part of this Manual.Moreover, the following manuals are available:– Service Manual, that can be consulted at Kent ServiceCenters.– Spare Parts List, supplied with the machine.SPARE PARTS AND MAINTENANCEAll necessary operating, maintenance and repair proceduresmust be carried out by qualified personnel or by Kent ServiceCenters. Only original spare parts and accessories must beused.Call Kent for service or to order spare parts and accessories,specifying the machine model and serial number.CHANGES AND IMPROVEMENTSKent constantly improves its products and reserves the rightto make changes and improvements at its discretion withoutbeing obliged to apply such benefits to the machines thatwere previously sold.Any change and/or addition of accessory must be approvedand performed by Kent.SAFETYThe following symbols indicate potentially dangeroussituations. Always read this information carefully and take allnecessary precautions to safeguard people and property.The machine Operator's cooperation is essential in order toprevent injury. No accident prevention program is effectivewithout the total cooperation of the person responsible for themachine operation. Most of the accidents that may occur in afactory, while working or moving around, are caused byfailure to comply with the simplest rules for exercisingprudence. A careful and prudent Operator is the bestguarantee against accidents and is essential for successfulcompletion of any prevention program.SYMBOLSGENERAL INSTRUCTIONSDescription of potential risk of damages to people andmachine.– Before performing any maintenance/repair operation,disconnect the battery.– This machine must be used by properly trained andauthorized personnel only. Children or disabled peoplecannot use this machine.– Keep the battery far from sparks, flames andincandescent material. During the normal operationexplosive gases are released.– Do not wear jewelry when working near electricalcomponents.– Do not work under the lifted machine without support itwith safety stands.– Do not operate the machine near toxic, dangerous,inflammable and/or explosive powders, liquids orvapors.– Battery charging produces highly explosive hydrogengas. Keep the tanks open during battery charging andperform this operation in well-ventilated areas and awayfrom naked flames.MACHINE model .............................................................MACHINE serial number .................................................DANGER!It indicates a dangerous situation with risk ofdeath for the Operator.WARNING!It indicates a potential risk of injury for people.CAUTION!It indicates a caution related to important oruseful functions. Pay attention to theparagraphs marked by this symbol.NOTERefer to the manual before performing anyoperation.DANGER!