KERN 572 Operating Instructions Manual

Also see for 572: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

KERN 572 Operating Instructions Manual Manual pdf 15 page image

4.10.5 Auto-offThe Auto-off function turns off the balance after nearly 60 seconds when it is not used.Activation of the Auto-off function:Auto-off Waagenanzeige1. Press MODE-key repeatedly until display shows:2. Press YES to select Auto-off3. Press NO to deselect Auto-off4. Press MODE-key repeatedly until the balance displays ingrams again, or press TARE-key.Auto-off?Auto-off?XAuto-off?0,0 g5 Interface RS 232 C5.1 Technical Data 8-bit ASCII Code 1 start bit, 8 data bits, 1 stop bits, no parity bit Baud rate adjustable to 600, 1200, 2400, 4800 and 9600 baud (default) Miniature DIN plug is necessary type MP-371/C 7 When working with an interface correct operation is secured only if the correspondingKERN-interface-cable (max. 2m) is used.5.2 Description of the jackPin 2: transmit dataPin 3: receive dataPin 5: signal ground572/KB/DS-BA-defsi-0246 35