KERN 572 Operating Instructions Manual

Also see for 572: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

KERN 572 Operating Instructions Manual Manual pdf 6 page image

3 Installation3.1 UnpackingTake the balance carefully out of the packing. Take off plastic wrap. Install the balance atthe place intended for use.Please retain all items of packaging in case of any future transit requirements. Check theunit immediately for any visible transit damage and check that all accessories are included.Standard accessories:572/KB DS- Balance with a weighing plate of high-grade steel- Adapter- Adjusting weight- Operating instructions- Weighing bridge- Analyse instrument- Adapter- Operating instructions3.2 Power supply/Mains operationCompare the voltage at the mains adapter with the mains voltage of the supply socket! Thebalance may only be connected to the mains unit provided. The supply socket must beearthed in accordance with electrical codes. Testing is only permitted by approvedspecialist electrical companies.3.3 Description of keyboard functionsKey FunctionON/OFF Switch balance on and offPRINT Print a weighing result (when printer connected)REF - Determine the set reference (in counting mode resp. Percentmode).MODE 1. "CAL" adjusting2. Printer -->2400 Bd, 4800 Bd, 9600 Bd, 19200 Bd. Enumerator,AUTOPRINT; AUTOPRINT PC.3. "Count" parts counting4. "%" Percent determination5. Variable Factor6. "Fast" (1 – 5)7. "Autotare"8. "Auto off" automatic shutoff9. "Test" (for service only)<-> g Switch pieces/percent to weight and back.Net/Total FunctionUNIT Unit Conversion + Variable ValueTARE Tare, set display to zeroYES Confirm in MODE programme/ Fast settingNO Delete in MODE-programme/Fast setting26 572/KB/DS-BA-defsi-0246