AES/AEJ-BA-e-0912 3711.1 Weighing / Weighing unit changeÖ Place goods to be weighed on balanceÖ Wait until the stability display appears [|]Ö Read weighing result.Ö Press repeatedly the button F to switch-over dis-play into net/grossNet weight unity A ↔ gross weight unity Asee chapter 8.4, or in other activated weighingunity (menu setting [ C3.W.B ] )100.0000 g 100.0000 g B/G500.000 mT 11.2 Parts countingDuring piece counting parts can either be counted into a container or out of a con-tainer. To count a greater number of parts the average weight per part has to bedetermined with a small quantity (reference quantity).The larger the reference quantity, the higher the counting exactness.High reference must be selected for small parts or parts with considerably differentsizes.The process has four steps:• Tare the weighing container• Determine the reference unit• Original weighing of reference weight• Count the itemsActivate functionÖ In weighing mode keep the F-key pressed downuntil [FWnm] appears on the display. Release but-ton. The first menu item showing the current set-ting will be displayed. FonmÖ Use the TARE-key to select “piece counting” andconfirm by pressing the S-key.The balance is situated in the piece countingmode. 0PCS
