AES/AEJ-BA-e-0912 5711.7.3 Enable function / settings in menuActivate functionÖ In weighing mode keep the F-key pressed downuntil [FWnm] appears on the display. Release but-ton. The first menu item showing the current set-ting will be displayed. FonmÖ Press the F-key and menu item [2 SEL] willappear.Ö Select the desired setting by pressing the TARE-key[2] : Tolerance weighing[ 3 ]: Tolerance weighing /Add-upSelect menu item “settings“Ö Press the F-key againÖ Press the TARE-key to select the desired setting,see chpt. 10.1.4. From then on additional settingscan be selected each time the F-key is pressed.The first menu item for settingthe tolerance marker ap-pears.How to change settingsÖ Select the desired setting by pressing the TARE-key, see chpt. 10.1.4.Ö Confirm by pressing the S-key.How to save settings / how to exit the menuÖ Press the S-keyWeighing balance is in tolerance mode, the trian-gular tolerance tags are faded in.0.0000 g