AES/AEJ-BA-e-09125811.7.4 Tolerance control for absolute values• Entering 2 limits by weighing1. How to enable the tolerance weighing function[2.SEL.2] or [2.SEL.3], see chpt. 11.7.3.2. For settings in menu see chpt. 11.7.3.Setting for 2 limiting values:Setting for absolute value:3. How to save settings / how to exit the menuÖ Press the S-keyWeighing balance is in tolerance mode, the trian-gular tolerance tags are faded in. 0.0000 g 4. Entering limiting values:Ö Press the S-key for about 4 seconds until[L. SET.] appears and then let go. The most re-cently saved lower limit will be displayed (flash-ing).L. SET0.0000 gM
