AES/AEJ-BA-e-0912 7914.4.5 Output weighing data in operating modeS 1 = 1 wordS1 Code SignificanceL 4CH Goods to be weighed below tolerance limitG 47H Goods to be weighed within tolerance rangeH 48H Goods to be weighed above tolerance limit1- or 2 end points1 31H Limit 12 32H Limit 23 33H Limit 34 34H Limit 45 35H Limit 53- or 4 end pointsT 54H Total (add-up)U 55H Average piece weight (piece counting /weight value (weighing)(SP) 20H No ratingd 64H GrossFile Type14.4.6 Data statusS 2 = 1 wordS 2 Code SignificanceS 53 H Data stabilized *U 55 H Data not stabilized (fluctuating) *E 45 H Data error, all data apart from S 2 not allowed.Balance indicating error (o-Err, u-Err)sp 20 H No special status14.4.7 Interval data outputWhen an interval output is started or stopped, this will result in the output of aheader or footer line.Header consisting of 15 characters (CR=0DH, LF=0AH)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15- - - - - - - - - - - - - - -Footers Two line feeds are inserted.
