KERN ITS Operating Instruction

Also see for ITS: Service manual

CountingITS-BA-e-072020User manual ME-Nr.:22017077 01/073.7 Counting with two scalesFor piece counting, it is possible to connect a second scale or weighing platform, e. g.a floor scale for counting a large number of pieces via the optional analog secondscale interface.The necessary settings for the application and interface parameters are described inthe Sections 4.4.1, 4.6.1 and 4.6.4.3.7.1 Counting with a reference scalePrerequisiteThe connected second scale is configured as reference scale.1. Place the reference parts on the reference scale and press or .The scale determines the average piece weight and changes to the display inpieces (PCS).2. Place the parts to be counted on the first scale.The total quantity is displayed.Note • If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulkscale is displayed.• If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to thebulk quantity.3.7.2 Counting with a bulk scalePrerequisiteThe connected second scale is configured as bulk scale.1. Place the reference parts on the first scale and press or .The scale determines the average piece weight and changes to the display inpieces (PCS).2. Place the parts to be counted on the bulk scale.The total quantity is displayed.Note • If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulkscale is displayed on the bulk scale.• If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to thebulk quantity.