Kaba E-PLEX 50XX SERIES Operation Manual

Kaba E-PLEX 50XX SERIES Operation Manual Manual pdf 12 page image

12USER LEVELSFive different classifications of users can perform various operations at the lock.Master User - The Master User is the top-level manager who performs theinitial lock setup activities and can program all lock functions. There is amaximum of one Master User per lock.Manager - A Manager can program all lock functions except:• defining the Access User Code length• modifying the lock ID• modifying master user Access Code• changing date and time• resetting to default value• activating lockout mode• adding / deleting / enabling / disabling a Manager User. The number ofManagers is limited only by available user table space (299 maximumbecause one (000) is reserved for the Master Code).Access User - An Access User has the ability to open the lock. The number ofAccess Users is limited only by available user table space (299 maximumbecause one (000) is reserved for the Master Code).Service User - A user with an Access Code valid for a configurable period of time.This period of time starts on the first use of the code. Each Service User combina-tion is automatically deleted from the locks memory after its period of timeexpires. The number of service users is limited only by available user tablespace (299 maximum because one (000) is reserved for the Master Code).M-Unit User - The M-Unit User (Maintenance User) is only applicable whenused with a handheld PDA and the E-Plex software, sold separately. Please referto the “E-Plex Standard” Software User Guide for M-Unit operation.Note: The total number of codes enrolled into the lock at any given timecannot exceed 300 (plus M-Unit User if applicable), regardless of codeclassification.USER CODESEach time you add a user to give access to a door, you must program the doorwith an Access Code for them. This User Access Code can also be referred toas a PIN (Personal Identification Number). If you modify the Access Code foran existing user, the procedure is the same.User Codes must not have the exact same numbers in the same positionas the Master Code.The Master Code 00004992 is used as an example in the table below.