Kaba E-Plex 5200 User Manual

Also see for E-Plex 5200: Quick reference guide

Contents

Kaba E-Plex 5200 User Manual Manual pdf 12 page image

Getting Started2–2 PKG 3114 0106 E-Plex Advanced ACS User’s GuideSystem RequirementsThe following hardware and software minimum requirements are recommended to use the E-Plex Advanced ACS.• IBM compatible PC (Pentium II or greater) capable of running Windows with an availableUSB or serial port for a PDA cradle or a HotSync cable.• Screen area resolution capability of 1024 x 768 pixels.• CD-RW drive for installing the software and for backing up the database.• Hard disk drive with at least 20 MB of disk free space.• Minimum system memory of 128 MB, or as recommended by the operating system.• Windows 2000 Professional (Service Pack 4 or greater), Windows XP Home (ServicePack 2 or greater), or Windows XP Professional (Service Pack 1 or greater).• Palm PDA running Palm OS 4.0 or higher. See the latest list of compatible PDAs on theE-Plex 5200/E-Plex 5700 Web site: www.e-plexlock.com.• A Palm cradle or a HotSync cable is required to connect the Palm to the PC.Note: For E-Plex 5700 lock systems only: You can order the pcProx™ CardReader/Enroller with your E-Plex Advanced ACS. This device makes it quick andconvenient to enroll/assign Prox Cards to E-Plex 5700 lock users. It can also be usedto read and verify a user’s “lost and found” card. However, it is not required if all of yourProx Cards are standard 26-bit Wiegand format, in which case you can manually inputcard IDs through Batch enrolling. A USB port is required at the PC to use the ProxReader/Enroller.Basic System SetupComplete the following steps in this order prior to setting up the system for use:• Install the Palm Desktop OS on the PC, and test for a successful HotSync operation onthe Palm PDA (M-Unit).• Install and register the E-Plex Advanced ACS software on the PC, ensuring first that youhave Administrative rights to the PC. You must register the software for successfulinstallation.• Install the E-Plex Palm Interface application on the M-Unit.• For E-Plex 5700 lock systems only: Connect the Prox Card Reader/Enroller and enablethe device (as connected) in the System Setup | System Settings menu of the E-PlexAdvanced ACS software.Quick Start GuideComplete this Quick Start Guide to quickly set up an E-Plex 5200/E-Plex 5700 lock.1. Ensure that you have already installed your Palm PDA Desktop OS version 4.0 or higheron your PC and that your Palm PDA communicates (HotSyncs) to your PC without anyproblem. Your Palm PDA must also be set with the correct date and time.