Kaba E-Plex 5200 User Manual

Also see for E-Plex 5200: Quick reference guide

Contents

Kaba E-Plex 5200 User Manual Manual pdf 6 page image

About the E-Plex Advanced ACS1–2 PKG 3114 0106 E-Plex Advanced ACS User’s GuideSystem ComponentsThe E-Plex Advanced ACS contains the following system components:• E-Plex 5200 and/or E-Plex 5700 locks• PC and the E-Plex Advanced ACS software• Handheld M-Unit and the E-Plex Advanced ACS M-Unit software• If E-Plex 5700 locks are used, Prox Cards and a Prox Card Reader/EnrollerNote: The Prox Card Reader/Enroller is recommended, but not required.E-Plex 5200 and E-Plex 5700 LocksThe E-Plex 5200 and E-Plex 5700 door locks are stand-alone, battery operated electroniclocks that function to grant access to authorized users. An E-Plex 5200 lock grants accesswhen users enter a valid PIN at the lock keypad (pushbuttons). An E-Plex 5700 lock will grantaccess if a user enters a valid PIN, presents a valid Prox Card to the Prox Reader on the lockfront housing, or enters a valid PIN followed by an associated valid Prox Card. Either modelcan store up to 3,000 unique users and store the last 30,000 transactions (audits) in the lockmemory. There is only one Master User per lock.Lock ModesYou can access the E-Plex 5200 or the E-Plex 5700 lock by three modes:• Factory Mode – The lock is shipped from the factory in Default Factory Mode and isoperational after being installed. The lock can only be opened with the Default FactoryMaster User PIN of “12345678.”• Access Mode – This mode refers to a lock that is operational for user access. When thelock is in Access Mode, the method of lock access is PIN only for the E-Plex 5200. Themethod of lock access for the E-Plex 5700 is PIN only, Prox Card only, or PIN and ProxCard.• Pushbutton Programming Mode – In this mode, the Master User, the Manager(s), or theM-Unit Users can enter one or more command sequence to program, configure, or auditthe lock.For more information about using the lock in these modes, refer to States of the Lock inChapter 4, Operating the E-Plex Lock at its Keypad.Lock Access MethodsYou can open a lock using one of three different access methods. You can set up the lock torequire different access methods for different users or for the same user operating the lock ondifferent access schedules.PIN Only (E-Plex 5200 or E-Plex 5700)Entering a valid PIN into the lock keypad will grant access to the lock.