Programming and Auditing Locks5–12 PKG 3114 0106 E-Plex Advanced ACS User’s GuideTransferring Lock Audits from the M-Unit to the PCComplete the following steps to transfer lock audits from the M-Unit to the PC.1. After downloading the lock audit to the M-Unit PDA, return to your PC.2. Connect the M-Unit to the PC with the cradle or cable.3. HotSync the M-Unit. Refer to steps 1–4 of HotSyncing the M-Unit in Chapter 2, GettingStarted.Note: If it appears that the lock data did not successfully transfer to the M-Unit, youshould check to make sure that the Palm HotSync E-Plex ACS Conduit has beeninstalled on the PC.To do so, right click on the HotSync icon in the system tray of the PC. Select Customfrom the menu options to display the list of installed conduits and their actions. If“EPlexACS” is not found in the list, go to the Windows Start menu on the PC andaccess Start | Programs | E-Plex Advanced ACS | Install Palm HotSync E-PlexACS Conduit to install the conduit. Then, repeat the process to upload data from theM-Unit to the PC.4. After you have transferred the files from the M-Unit to the PC, disconnect the M-Unit fromPC.5. To transfer audits into the E-Plex Advanced ACS software, refer to Auditing Locks inChapter 3, Using the E-Plex Advanced ACS Software.Viewing Lock DiagnosticsYou can view lock diagnostics when connected to the lock. This provides you informationabout:• The model of the lock• The lock function• Time and date• Battery life• VCC• CPU MHz• Firmware version• Last key pressed on the lock• Days in use (since first startup)• Privacy/deadbolt on/off• Remote unlock on/off• Key override on/off
