Using the E-Plex Advanced ACS SoftwareE-Plex Advanced ACS User’s Guide PKG 3114 0106 3–315. Click OK again. The software returns to the updated Manage Users window:Note: You should update your locks to reflect modified users by programming the M-Unit and uploading the information to the locks. For more information, refer to M-UnitHandheld PDA in Chapter 5, Programming and Auditing Locks.Batch Enrolling Users (E-Plex 5700 Only)The Batch Enroll option allows an Operator to enroll multiple users at once. The Prox CardReader is not used in this process. When this option is selected, a screen will prompt theOperator for the Facility Code and the starting and ending Prox Card numbers. This functionis only available when operating under the 26-bit Wiegand card format. The display format isxxx-yyyyy, where xxx = 000 to 255 (Facility code) and yyyyy = 00000 to 65535 (Cardnumber); together, the codes comprise the card ID.Complete the following steps to batch enroll users:1. From the Manage Users window, click Batch Enroll. The software displays the BatchEnroll User Card IDs window:2. From the User Group drop-down list, select a user group.3. In the Facility Code field, type the facility code.
